Transmitter AC-Powered Heat Sink

The heat sink assembly includes an integral +12 VDC fan and a power supply transformer. Use for TIMTER™, Dual TIMTER™, and nanoTX™ transmitter testing at the bench; not airborne approved.

Part Number: QSX-AC-32-HS-12V
(formerly QSX-TIMTER-HS-12V)

Related Literature

TypeTitleUpdatedDescription

Transmitter Heat Sinks DatasheetFeb-2021

Quasonix offers different types of integrated and add-on heat sinks, as described in this datasheet. Please contact Quasonix for heat sink recommendations for your particular TIMTER™ transmitter.

Thermal Considerations

The heat sink required for a particular transmitter depends heavily on the installation. Factors such as altitude, air temperature, air flow, and mass of the mounting surface all have a substantial impact on the flow of heat away from the transmitter. Quasonix offers several types of integrated and add-on heat sinks. Please contact support@quasonix.com for the power dissipation required and heat sink recommendations for your particular TIMTER™ transmitter.

Regardless of the heat sink, Quasonix strongly suggests using a thermal pad, such as Q-Pad® II from Bergquist.

2 thoughts on “Transmitter AC-Powered Heat Sink”

    • Michael,

      My guess (without any verification) is that the unit will run down to -34°C – if it’s already running as the temperature is lowered. It probably will not start at -34°C.

      The airborne heat sink will meet your need.

      Best Regards,
      Terry

      Reply

Leave a Reply to Quasonix Cancel reply

Discussions are moderated and should be professional and relevant. Please see our comment policy for details. Your email address will not be published.